• Product Name :

    TS-G2500BNC Antenna Surge Protector

  • Instruction

    TS-G2500BNC Antenna Surge Protector is for 50Ω coaxial system at LPZ0B-1;Designed according to IEC 61643-21; GB 18802.21; YD/T 1542. and applied to various feed system,and so on.

    ♦ Product Size

    TS-G2500BNC-Antenna-Surge-Protector-Professional-Manufacturer


    ♦ Basic Circuit Diagram

    TS-G2500BNC-Antenna-Surge-Protector-Professional-Manufacturer

     

    ♦ Technical Data 

    Model 

     

    TS-G2500BNC 

    Rated voltage (max. continuous voltage) 

    Uc

    250V

    Nominal current

    IL

    3.5A

    Lightning impulse current(10/350)

    Iimp

    1KA

    Nominal discharge current (8/20) 

    In

    8KA

    Max.discharge current (8/20)

    Imax

    20KA

    Voltage protection level at Imax 

    Up

    ≤750V

    Frequency range

    F

    2500MHZ

    Max.output power 

    p

    500W

    Insertion loss 

    aE

    ≤0.2dB

    Return loss(input/output)

    aR 

    ≥20dB

    Surge impedance

    Z 

    50Ω

    Operating temperature range 

     

    -40°C...+80°C

    Connection (input / output) 

     

    BNC (socket/plug)

    Shield earthing

     

    Outgoing connecting port

    Enclosure material 

     

    Aluminum

    Standards 

     

    IEC 61643-21; GB 18802.21; YD/T 1542

    Certification 

     

    CE(LVD,EMC)

     

     MAIN CHARACTER 
    1, Good discharge capacity, low voltage protection level 

    2, Quick response, no interruption

    3, BNC head connection, easy for installation

    INSTALLATION INSTRUCTION 

    1. This Antenna Surge Protector is connected in series to the protected device.

    2. The out terminal should be connected to the protected devices.

    3. Antenna Surge Protector's earthing terminal must be connected to nearby earthing BusBar or the metal earthing enclosure of protected device.

    4. After above, you should ensure the circuit is functioning.

    Regularly inspect the operating status, especially after lightning. Once the communication is off, electrician should check/replace the Antenna Surge Protector. 

     

    INSTALLATION DIAGRAM (TS-2500BNC & TS-G2500N) 

    TS-G2500BNC-Antenna-Surge-Protector-High-Efficiency

    WARNING:

    1The device must be installed by electrically skilled person, conforming to national standards and safety regulations.

    2, It is recommended that installation should be done under power off condition.