TS-8RJ45/5/8 RJ45 Surge Protection

Model 

  TS-8RJ45/5/8 

 TS-8RJ45/24/8 

Nominal voltage 

Un

5V- 

24V-

Rated voltage (max. continuous voltage) 

Uc

6V-

4.2V~ 

30V-

21.1V~

Nominal discharge current (8/20)

In

300A (line-line)

300A (line-PG)

0.1kA (line-line)

0.1A (line-PG)

Max. discharge current (8/20)

Imax

400A (line-line)

400A (line-PG)

0.2kA (line-line)

0.2kA (line-PG)

Voltage protection level at In

Up

≤50V (line-line)

≤50V (line-PG)

≤60V (line-line)

≤60V (line-PG)

Voltage protection level at 1kV/ms

Up

≤ 13V (line-line)

≤ 13V (line-PG)

≤ 45V (line-line)

≤ 45V (line-PG)

Capacitance

C

≤ 35pF (line-line)  

≤50pF (line-PG)

≤ 16pF (line-line)  

≤20pF (line-PG)

Response time

t_A

≤1ns (line-line)

≤1ns (line-PG)

≤1ns (line-line)

≤1ns (line-PG)

Bandwidth

f_G

165Mbits/s

300Mbits/s

Max. data transmission rates

Vs

155Mbits/s

Operating temperature range

-40°C...+80°C

Relative humidity

≤95% (25°C)

Connection (input / output)

RJ45 shield socket

Pining

1/2, 3/6, 4/5, 7/8

Shield earthing

Metal enclosure

Standards

IEC 61643-21; GB 18802.21; YD/T 1542

Certification

CE(LVD,EMC)

INSTALLATION INSTRUCTION 

1. This RJ surge protection is connected in series to the protected device.

2. The out terminal should be connected to the protected devices.

3. SPD's earthing terminal must be connected to nearby earthing BusBar or the metal earthing enclosure of protected device.

4. After above, you should ensure the circuit is functioning.

Regularly inspect the operating status, especially after lightning.Once the communication is off, electrician should check/replace the SPD.

INSTALLATION DIAGRAM 

WARNING:  

1, The device must be installed by electrically skilled person, conforming to national standards and safety regulations.

2, It is recommended that installation should be done under power off condition.