TS-RJ45/5/8(1000M) Ethernet Surge Arrester

Model 

TS-RJ45/5/8(1000) 

TS-RJ45/24/8(1000) 

Nominal voltage 

Un

5V 

24V

Rated voltage (max. Continuous dc voltage) 

Uc

8V 

30V

Rated voltage (max. continuous ac voltage)

Uc

5V

18V

Nominal Current  

I_L

1A

Lightning Impulse Current (10/350) (Line-PG)

Iimp

0.5kA

Nominal discharge current (8/20) 

In

0.15kA (line-line)

2.5kA (line-PG)  

Max. discharge current (8/20) 

Imax

10 kA(total)

Voltage protection level at In 

Up

≤35V

(line-line)

≤500V

(line-PG) 

≤60V(line-line)

≤500V (line-PG)

Insertion Loss at 250MHz

≤2dB

≤2dB

Capacitance 

C

≤25pF (line-line)

≤30pF (line-PG) 

≤35pF (line-line)

≤50pF (line-PG)

Max. data transmission rates 

Vs

1000 Mbits/s 

Operating temperature range 

-40°C...+80°C 

Connection (input / output)

RJ45 shield socket

Pining

1/2, 3/6, 4/5, 7/8

Earthing via

Earthing screw

Mounting on

35mm DIN rail

Enclosure material

Aluminum

Standard

IEC 61643-21 & GB 18802.21

Compliance

CE(LVD,EMC & RoHS)

INSTALLATION INSTRUCTION 

1. This ethernet surge arrester is connected in series to the protected device.

2. Mount the Ethernet Surge Arrester on 35 mm DIN rail.

3. The out terminal should be connected to the protected devices.

4. Ethernet Surge Arrester's earthing terminal must be connected to nearby earthing BusBar or the metal earthing enclosure of protected device.

Regularly inspect the operating status, especially after lightning.Once the communication is off, electrician should check/replace the Ethernet Surge Arrester.

INSTALLATION DIAGRAM 

WARNING：

1, The device must be installed by electrically skilled person, conforming to national standards and safety regulations. 

2, It is recommended that installation should be done under power off condition.