TS-8RJ45/5/8(1000M) Ethernet Surge Protection

Model 

TS-8RJ45/5/8(1000)

Nominal voltage 

Un

5V- 

Rated voltage (max. continuous voltage) 

Uc

6V-

4.2V~ 

Normal current

I_N

0.35A

Nominal discharge current (8/20) 

In

300A (line-line)

2.5KA (line-PG) 

Max. discharge current (8/20) 

I_total

5KA (line-PG)

Voltage protection level at In 

Up

≤15V (line-line)

≤150V (line-PG) 

Voltage protection level at 1kV/ms 

Up

≤ 13V (line-line)

≤ 150V (line-PG) 

Capacitance

C

≤ 35pF (line-line)  

≤35pF (line-PG)

Response time 

t_A

≤10ns (line-line)

≤10ns (line-PG) 

Max. data transmission rates 

Vs

1000 Mbits/s 

Dimension(mm)

L*W*H   8P:168*82*41mm

Operating temperature range 

-40°C...+80°C 

Relative humidity

≤95% (25°C)

Connection (input / output) 

RJ45 shield socket 

Pining

1/2, 3/6, 4/5, 7/8

Shield earthing 

Metal enclosure 

Standards 

IEC 61643-21; GB 18802.21; YD/T 1542 

Certification 

CE(LVD,EMC) 

INSTALLATION INSTRUCTION 

1. This Ethernet Surge Protection is connected in series to the protected device.

2. The out terminal should be connected to the protected devices.

3. SPD's earthing terminal must be connected to nearby earthing BusBar or the metal earthing enclosure of protected device.

4. After above, you should ensure the circuit is functioning.

Regularly inspect the operating status, especially after lightning. Once the communication is off, electrician should check/replace the SPD.

INSTALLATION DIAGRAM

WARNING:  

1, The device must be installed by electrically skilled person, conforming to national standards and safety regulations. 

2, It is recommended that installation should be done under power off condition.