Network Surge Arrester
Home » Lightning Products » IT Surge Protection » Network Surge Arrester
TS-RJ45POE48 Single-Channel Ethernet Surge Protector PoE & Gigabit
Previous : TS-POE Surge Protector
Instruction
TSTLP® CAT6 1000MBits/s Ethernet PoE Surge Protector with RJ45 Connector
♦ INTRODUCTION: TS-RJ45POE48 Gigabit PoE Surge Protection Device, designed according to IEC standard for CAT 6 or Class E integrated wiring system, is for installation at LPZ OB-2 & higher interface or directly installed near the equipment. All the industrial Ethernet 10MBits/s, 100MBits/s, 1Gbit(1000MBits/s) or higher network surge protection; Normal current, continuous DC high voltage, to support the POE network with power supply system, IEEE 802.3at/af. applicable.
Applications: Offices and industries like Gigabit Ethernet, ATM or ISDN system, and like VoIP or VFD POE system can be protected.(e.g. Switch, router, HUB, modern and so on)
Similar/Related Products:
♦ Dimension of TS-RJ45POE48 Surge Protective Device：
♦ Basic Circuit Diagram of TS-RJ45POE48 Surge Arrestor
♦ Technical Data of TS-RJ45POE Cat 6 PoE Surge Protector
|
Model |
|
TS-RJ45POE48 |
|
Normal voltage |
Un |
48Vdc- |
|
Rated Voltalge(Max. Continuous Voltage) |
Uc |
48Vdc- / 34Vac~ |
|
Max. Continous voltage(POE) |
|
57Vdc- |
|
Normal current |
IL |
1A |
|
Nominal discharge current (8/20) |
In |
0.15kA (line-line) 2.5kA (line-PG) |
|
Total normal discharge current(8/20) |
In |
10kA (8/20) |
|
Normal discharge current (8/20) (POE) |
In |
0.15kA (pair-pair) |
|
Combination wave |
Uoc |
4kV |
|
Voltage protection level at In |
Up |
≤ 190V (line-line) ≤ 500V (line-PG) |
|
Voltage protection level at In (POE) |
Up |
≤ 500V (line-line) |
|
Transmission frequency |
fG |
500MHz |
|
Data transmission rates |
Vs |
1000Mbits/s |
|
Insertion loss at 250MHz |
aE |
≤ 2dB |
|
Capacitance |
C |
≤ 165pF (line-line) ≤ 255pF (line-PG) |
|
Operating temperature range |
|
-40°C...+80°C |
|
Connection |
|
RJ45 shield (input / output) |
|
Shild earthing |
|
Screw terminal |
|
Mounting on |
|
35mm DIN rail or without as request |
|
Enclosure material |
|
Aluminum |
|
Standards |
|
IEC 61643-21 & GB 18802.21 |
|
Compliance |
|
CE(EMC,LVD & RoHS) |
♦ MAIN CHARACTER
1- For protecting computer data transmission system, network system and so on.
2- Good discharge capacity, low voltage protection level
3- Quick response, high transmission speed, low signal attenuation
4- Metallic housing RJ45 connection, easy for installation.
5- Optional with DIN rail installation
|
INSTALLATION INSTRUCTION 1. This lightning arrester is connected in series to the protected device. 2. Mount the lightning protector on 35mm DIN rail (for optional). 3. The out terminal should be connected to the protected devices. 4. SPD's earthing terminal must be connected to nearby earthing BusBar or the metal earthing enclosure of protected device. 5. After above, you should ensure the circuit is functioning. Regularly inspect the operating status, especially after lightning. Once the communication is off, electrician should check/replace the SPD. |
|
INSTALLATION DIAGRAM
|
|
WARNING: 1, The surge arrester must be installed by electrically skilled person, conforming to national standards and safety regulations. 2, It is recommended that installation should be done under power off condition. |
Also referred as PoE Surge Arrester / PoE Surge Arrestor / Surge Protector for PoE Camera
- CONTACT US
0086 13926098193
0086 20 28819702 EXT 27806
[email protected]
Hongdiyuan Industrial Park, Wufeng Avenue, Linjiang Town, Jiangdong New District, Heyuan, Guangdong,P.R.C.
http://www.tslpro.com
+86 13926098193
F13926098193
tslpro.tstlp-
