• Product Name :

    TS-ITS-ME5 RS422 Surge Protection

  • Instruction

    ♦ TS-ITS-ME series Data Line Surge Protection Devices for Information Technology System 

    INTRODUCTION:The series surge protector is applied to the signal control system, such as RS485,RS232, RS422, V11, TTY, audio video,xDSL, fire alarm (panel) system,flexible to make it to be 2 wires, 3 wires, 4 wires or more wires protection.

    CUSTOM-MADE CIRCUIT、Voltage & Technical Data AVAILABLE

    Similar/Related Products

    TS-ITS-ME5-RS422-Surge-Protection-High-Quality

    TS-ITS-ME5-RS422-Surge-Protection-Picture

    ♦ Product Size of TS-ITS-ME Series SPD

    TS-ITS-ME5-RS422-Surge-Protection-Warranty


    ♦ Technical Data 

    MODEL

    TS-ITS-ME5 

    TS-ITS-ME12 

    TS-ITS-ME24 

    TS-ITS-ME48 

    TS-ITS-ME110 

    Product Application

    The series products are applied to the signal control system, such as 4-20mA,RS485,RS422, RS232, V11, TTY, video, xDSL, Fire Alarm System,Audio,flexible to make it to be 2 wires, 3 wires, 4 wires or more wires protection.

    Un

    5V

    12V

    24V

    48V

    110V

    Up

    15V

    25V

    60V

    85V

    300V

    In

    5KA

    5KA

    5KA

    5KA

    5KA

    Imax

    10KA

    10KA

    10KA

    10KA

    10KA

    Series R*(1)*

    1 Ω

    1 Ω

    1 Ω

    1 Ω

    1 Ω   

    Series R*(2)*

    100μH

    100μH

    100μH

    100μH

    100μH

    Load current*(3)*

    400mA

    400mA

    400mA

    400mA

    400mA

    Trans f( G )(4)*

    f=25 KHz with L; f=50 MHz with R

    Operating Temperature

    -40℃+80℃

    Operating humidity

    ≤95%RH

    If *(1), * (2) is installed, then R=1 Ω, L=100 μH *(3 ) >400 mA, need special making ;

    (4):Max trans Fg

     MAIN CHARACTER 

    1, Adopting multi-level protection, reasonable between level matching.

    2, Fast response

    3, Precise Clamping, low voltage protection level(low Up),less insertion loss,double over-voltage protection function,making the safety of protected equipment get most securiy.

    4, Modular intergration, installed by 35mm Din Rail.

    INSTALLATION INSTRUCTION 

    Regularly inspect the operating status, especially after lightning. Once the communication is off, electrician should check/replacethe SPD.

    TS-ITS-ME5 Surge Suppressor INSTALLATION DIAGRAM (FOR REFERENCE) 

    TS-ITS-ME series data surge protection

    TS-ITS-ME5-RS422-Surge-Protection-Manufacturer

    WARNING:  

    1. The surge protective device must be installed by electrically skilled person, conforming to national standards and safety regulations. 

    2. It is recommended that installation should be done under power off condition.